Tolhurst Thunderbolt MOE Mini Surfboard

Description

Tolhurst Thunderbolt MOE Surfboard

Words by Firewire’s Harley Ingleby: When I started out designing the MOE mid-length range I wanted to have an easy ride and good paddling, while keeping good stability and support. The bottom is pretty flat with a double concave between your feet, a really good combination for carving turns in a wide board. Rails are not too thick, for sensitivity, and they transition from neutral round forward through round tucked edge to the fin area and low hard behind the fins. The rails are foiled from forward of center toward the tail, for drive through turns and good travel around white water sections. The rocker is pretty even like the HIHP and a 5fin FCS II setup makes this a great fun board / one quiver board for traveling in fun wave areas.

This model is only availablein FCS2.

About this board:

Fin Boxes:FCS2x 5 – Fins not included
Tail shape:Round Tail
Dimensions/Litres:See size graph above
Construction: Thunderbolt Red Epoxy

Due to the flex and speed generating qualities of the thunderbolt red construction, these boards are best suited to everyday surf conditions as they will make the most of waist to head height surf. Thunderbolt Red surfboards are hand crafter for a classic feel with enhanced response. Starting off with an EPS foam blank, a high-density foam block is installed into the blank to provide a secure anchor point for the fin box. AVT flex control components are laminated to the bottom in an A shape, then a tapered groove is cut into the deck for the AVT stringer in a T shape, which is laminated onto the deck and pressed into the groove at specific depths.

AVT flex control components are laminated to the deck, in a V shape. This combination AVT shape defines the flex, responsiveness and feel of the board creating a waistline component which creates a pivot point for tail flex, and stores the energy generated by natural flexing and twisting forces generated during a turn, which then releases through the board and fin launching the board forward. Hand laminated fiberglass layer and PVC shell lock AVT flex control components in, then is cured in a mould for precise rocker and shape. Thunderbolt red blanks are then laminated in fibreglass giving them more flex than the black construction.

Designed in Japan, for the world.

Shipping & FAQ:

Australia wide postage available or local pick-up, choose at checkout. Boards in stock (see graph above) are ready to be sent & are sent out on the same day of purchase with tracking provided. Boards are safely packed in a box with layers of bubble wrap. See our shipping & FAQ tab above or visit this link:https://www..com/pages/shipping-faq